equipment
Machines and Accessories
Machines
Fire hose boring machine
Description
Hydraulic drive
Machine for boring 11/2″, 13/4″, 2″ and 21/2″ fire hoses.
It has a pressure regulating valve and a pressure gauge on its command panel to have perfect control of the applied force and its command button is developed with low voltage (24V) in order to avoid the risks that could cause an electric shock.
Technical characteristics
Table Machine
| Height | 420 mm 900 mm |
| Width | 860 mm 910 mm |
| Depth | 650 mm 600 mm |
| Weight | 90 kg 59 kg |
| Power supply | 380 V 50 Hz |
Powder extinguisher charging machine
Description
Easy-to-use portable machine for filling chemical powder extinguishers from 1kg to 100kg.
Vacuum loading, controlling the net weight by difference between the initial and final weight of the powder supply source.
This system ensures rapid and precise filling of the extinguisher, also achieving the absence of dust in the environment.
Loading times are between 20 and 75 seconds, depending on the size of the container and the type of powder used.
As maintenance it only requires periodic cleaning of the filter.
It does not require electrical installation and must only be connected to an air pressure line of 6 kgf/cm2.
Its conical polyurethane adapter can be used on containers with any type of thread.
Technical characteristics
| Height | 1130 mm |
| Width | 460mm |
| Depth | 500 mm |
| Weight | 25 kg |
| Pneumatic feeding | 6Kg/cm2 |
Approximate test times
| Capacity 1 kg | 15 to 20 sec |
| Capacity 2,5 kg | 25 to 35 sec |
| Capacity 5 kg | 45 to 60 sec |
| Capacity 10 kg | 50 to 75 sec |
Hydrostatic pressure testing machine
Description
Pneumatic drive
Machine with very low maintenance cost and easy handling. It allows working with pressures of up to 300 kgf./cm2 (30 Mpa).
Reading deformations in portable and wheeled fire extinguishers, high and low pressure gas cylinders.
Pressure controller that allows predetermining two test variables (high and low pressure).
Pressure selector key (high or low) and approximation button to adjust it.
Connection for a standard pressure gauge that allows you to verify the precision of the reading obtained on the digital indicator.
Developed with low voltage commands (24 Vdc) in order to avoid risks that could cause an electric shock.
Technical characteristics
| Height | 1050 mm |
| Width | 950 mm |
| Depth | 400 mm |
| Weight | 50 kg |
| Power supply | 220 V monofásica |
| Pneumatic feeding | 6Kg/cm2 |
| Pressure line | 0 – 300 kg/cm2 |
Approximate test times
| 10kg Powder Fire Extinguisher Contaianer | 6 to 10 sec (40 kgf/cm2) |
| 7kg CO2 fire extinguisher canister | 50 to 60 sec (300 kg/cm2) |
| 69 liter CNG container | 150 to 180 sec (300 kg/cm2) |
Portable fire extinguisher drying machine
Description
Machine for interior drying of portable powder, CO2 and halogenated fire extinguishers.
It allows the drying of up to 6 containers simultaneously through a current of hot air that eliminates humidity in approximately 10 minutes, a time that varies depending on the container and the accumulated humidity.
Its operation is simple and does not require maintenance.
Technical characteristics
| Height | 470 mm |
| Width | 1500 mm |
| Depth | 500 mm |
| Weight | 50 kg |
| Power supply | 220 V Single-phase (110V optional) |
| Electrical consumption | 14 Amp |
| Electrical resistance | 3200 W |
| Electric motor | 1/2 hp-2800 rpm |
Machine for drying fire extinguishers and cylinders for high pressure gases
Description
Machine for interior drying of portable fire extinguishers, on wheels and cylinders for high pressure gases.
It allows the drying of up to 6 containers simultaneously through a current of hot air that eliminates humidity in approximately 10 minutes, a time that varies depending on the container and the accumulated humidity.
Its operation is simple and does not require maintenance.
Technical characteristics
| Height | 2220 mm |
| Width | 1600 mm |
| Depth | 650 mm |
| Weight | 70 kg |
Power supply
| Electric | 220 V single-phase |
| Electrical consumption | 14 Amp |
| Electrical resistance | 3200 W |
| Electric motor 1/2 | hp-2800 rpm |
Vise for CNG/CO2 cylinders
Description
Pneumatic drive.
Pneumatically operated, it has adjustable jaws coated with elastomer that allow perfect clamping of CO2 and CNG cylinders of all sizes without damaging the paint of the container.
It only needs to be connected to a 6 kg/cm2 airline.
Technical characteristics
| Height | 950 mm |
| Width | 820 mm |
| Depth | 780 mm |
| Weight | 72 kg |
| Pneumatic feeding | 6 kg/cm |
Vise for holding fire extinguishers Manual operation
Description
Manually operated for holding fire extinguishers from 1 kg to 10 kg of powder, water or halogenated. Allowing the assembly and disassembly of the valve quickly, safely and without damaging the paint of the container.
Qualities
• Reduces labor cost
• Increase production
• Minimum maintenance
• Simple operation
Technical characteristics
| Height (mm) | 300 |
| Width (mm) | 490 |
| Depth (mm) | 370 |
| Weight (kg) | 22 |
Vise for holding fire extinguishers Pneumatic drive
Description
Pneumatically operated for holding fire extinguishers from 1 kg to 10 kg of powder, water and halogenated. Allowing the assembly and disassembly of the valve quickly, safely and without damaging the paint of the container.
It only needs to be connected to a 6 kgf/cm2 airline.
Qualities:
• Reduces labor cost
• Increases production
• Minimum maintenance
• Simple operation
Technical characteristics
| Height | 300 mm |
| Length | 490 mm |
| Depth | 370 mm |
| Weight | 24 Kg |
| Pneumatic feeding | 6 kgf/cm2 |
PUFFER for extinction testing in the laboratory
Description
Device for extinction tests in laboratories.
Manufactured according to IRAM 3672 STANDARD.
Completely built in stainless steel. With pressure gauge and valve to regulate the test pressure.
Technical characteristics
| Height | 500 mm |
| Length | 1200 mm |
| Width | 400 mm |
| Weight | 16 kg |
CO2 transferer Pneumatic drive
Description
Device for extinction tests in laboratories.
It is used to transfer CO2 and other alternative gases from Halon to portable and wheeled cylinders.
Its operation is carried out by means of a pneumatic pump driven by low pressure compressed air.
It is transportable and load control is determined by means of a scale.
It is provided with a safety valve to prevent overloading of the cylinders.
Technical characteristics
| Height | 390 mm |
| Width | 750 mm |
| Depth | 390 mm |
| Weight | 42 kg |
| Pneumatic feeding | Compressed air 7 Kgf/cm2 |
Accessories
Universal connection for low pressure hydrostatic testing
Description
Used for hydraulic trial of all types of containers no matter the thread.
Easy, user friendly and time saving operation. Fully stainless steel built.
Technical features
| Service maximum pressure | 40 kg/cm2 |
| Weight | 2,1 kg |
Device for discharging chemical powder extinguishers
Description
100 kg capacity drum with quick-closing lid.
Allows the discharge of manual and wheeled chemical powder extinguishers, preventing the spread of dust into the environment.
The dust can be recovered for later control and use.
It is recommended for performance tests and control of discharge times required in the IRAM Standards.
Technical characteristics
| Height | 900 mm |
| Diámetro | 440 mm |
| Depth | 770 mm (includes 500mm long acrylic tube) |
| Weight | 11 kg |
Universal clamp for pressurization of manual fire extinguishers
Description
This device only requires feeding the gas that pressurizes the extinguisher.
The valve at the outlet of the pressure regulator is what allows operation.
The tapered adapter eliminates the use of threaded couplings.
Qualities
• Minimal maintenance
• Reduces labor cost
• Increases production
• Simple operation
Technical characteristics
| Pneumatic feeding | Dry nitrogen |
| Maximum working pressure | 17 Kgf/cm2 |
| Weight | 2,5 Kg |